What kind of environment is required for the installation of photovoltaic bracket

What environment is required for pv scaffolds:It is well known that pv scaffolds for wind and solar hydro energy require careful siting and environmental assessment.Geothermal energy is available in limited areas.It seems that only solar photovoltaic scaffolds are more suitable for sustainable energy.Current solar pv support technology is not without problems.Photovoltaic support photovoltaic power generation is an applied power generation technology.Similar to the photoelectric effect,the electrons in the solar photovoltaic scaffold material will be excited after receiving light energy and enter different electron orbits,resulting in voltage between the two poles of the material.

Although the unit pollution of solar photovoltaic power generation is much lower than that of coal-fired power plants,some heavy metal pollution can also be generated during the manufacturing process of this material.In addition,the problems encountered in the generation of photovoltaic support are difficult to improve the efficiency of power generation,so large-scale photovoltaic support power stations need to take up a lot of space.In today's increasingly scarce land resources,this is also a major constraint.Therefore,if there is to be a big development of solar photovoltaic support,it will improve the efficiency of power generation.There are also plans to make power generation equipment easier to assemble and use.

Comparison of two materials of solar Energy Support:To decide whether to choose steel support or aluminum support,first understand the advantages and disadvantages of steel support and aluminum support.In terms of material strength,steel is superior to aluminum alloy in strong wind region and long span.In terms of deflection deformation,due to the shape and size of the profiles,elastic modulus and other parameters,under the same conditions,the deformation of aluminum profiles is 2.9 times that of steel.In addition,at the same weight,the cost of steel is better than aluminum profiles.In order to improve the photovoltaic stents,methods were adopted for them.Different materials are used in different ways.Hot dip galvanized 55-80 m steel and anodized 5-10 m aluminum alloy.